Now both sides printed label increasingly wide application, especially cosmetics and health products tags. A label on the bottle through the back of the transparent, transparent liquid see the first layer design, greatly enhances the visual impact (such as the petals of the ica, ruby, the second label) design in the back can be directly see, main mark product's simple introduction and company contact method, etc. The traditional process producing such labels very complex and cost is higher, the process is first in transparent self-adhesive materials face capable person on the first floor pattern of the printing, then with the transparent white material (usually PP) composite, again in the white material printing the second design, this eventually produce reversible design effect.
Materials-tags, one pace reachs the designated position
If the company's label Canada ETI would printing, coating, adhesive silicon integrated production line for the production Labeline, it only need in the white face film material (PP) on double-sided printing, besmear again next on silicon rubber attachment can be processed into the non-drying label, the cost to save as much as 65%.
In Labeline on a complete surface sheets can printing, the bottom paper coating, adhesive, silicon compound, die cutting until the finished product label, realizes from raw material to finished product label a forming, the technology greatly reduce the production cost, the label in high-end products such as cosmetic, beverage and personal care products labels have an application prospect.
Labeline the non-drying label is the production line ETI would Cohesio coating machine with the perfect combination of printing machine Metronome, and now the world already in the article nearly 60 production line production. ETI would label Cohesio composite coating production line that the whole of the label's production can in printer factory independently, to change the label of the traditional production technology industry. Stickers enterprise needed to buy some basic raw materials, such as paper/film/silicone oil/glue, in the face of material (printed text or white material) with silicon, adhesive and substrate after compound, processed into finished products. Attachment stickers Since 2000 the first device developed successfully having more than 30 companies buy and put into use. Metronome high precision printing machine is mainly used for flexible edition printing high-grade no end of paper thin film.
A label--first after the birth of the printing composite
Let us see how Labeline for the non-drying label production to provide solutions, a 10 color printing coated compound machine will show how to printing and double label: in two open book separately on a surface material and BOPP, PET substrate materials, dust, first BOPP and two materials after after feeding mechanism, corona into positive 4 color printing BOPP after flipping through a turn on opposite printing. Special design of the flip frame ETI would each part have porosity, film in the process of go in a state of suspension, avoid is always in the process of the transition, particularly applicable to scratch film printing film materials. On the material end before besmear on silicon rubber, and then and good surface composite material printing, and finally die cutting rewinding in equipment, the article points after with devices that can of finished products article points.
In addition to standard UV printing unit, printers can also choose to add LengTang or hot hot device, screen printing unit, gravure color group are offset printing color group, even all the unit can and flexo unit drawer swaps. This computer displays equipment six units use UV ultraviolet (is), but the rest of the dry water-based ink is used for drying were confirmed by IR (infrared). Because Labeline printing in the materials in composite stickers before is a bottomless paper thin film, so the tension control is very important, the tension control can be used in scope from 12 to 300 grams of thin film micron matte. Equipment adopts BST Promark both the alignment system, no matter how the device's speed change, can still keep accurate alignment, save the materials and working time to prepare.
ETI would equipment can easily achieve the non-drying label printing, because in the technological process of the ETI would first printing is again, compared with traditional make stickers off, not only realize the coated process full version color printing (the traditional process is coated in glue 'face printing, printing graphic area of no more than 30%, or glue the viscous will damage. In addition, the printing quality glue could not very elegant), and technology greatly simplified. The specific process for ETI would in no end of paper in the film after printing, besmear again on silicon glue to make the non-drying label printing design, so that in the glue between and material, get effective protection printing, without glazing or coated, the product structure and production cost comparison with the chart 1 shows similar, only white PP membrane into transparent PP film just.
