Hemorrhage is to point to increase the size of the product design, planted in a pattern of cut add some outspread, all around the place is the color to the 3 mm to expand. With generous open, for example, 16 finished product size for 210 X 285 MM, and making the draft will make it 216 X 291 MM, just for various manufacturing processes in the process of tolerance range use, in order to avoid the cutting edge of the finished product after the thief or cutting to the contents. In the making of the time we are then separated size and finished product design size, design is always better than finished product size size and is big out of the side is to be at the cutting off of printing, and the printed and cutting off the part is called printing bleeding. Hemorrhage is not all 3 MM, different product should be treated separately. (reality most commonly used is to add 3 MM) around the

Are there around the color piece will be added 3 mm place a bleeding, blue piece of red area around is to add a bleeding, if the page four edges is white need not add a bleeding.
(Gold Printing Group)