About the short version of the digital printing binding ways mainly have the following kinds:
First, binding class
1. Wireless gum
Wireless gum by modification of industrial equipment, equipment operation is simple, the fastest per hour can be binding 300, maximum binding thickness up to 52 mm.Binding process is: the melt, milling back, glue, the foreskin, cutting is complete.Its low cost, equipment lowest price in 40000 yuan, the highest but ten yuan.Due to the wireless adhesive binder needs certain area, will need to be equipped with paper cutter, melt process will produce air pollution, not suitable for office use, its users are operational.
2. The wrap-round hot-melt binding
The binding mode adopts the envelope of gum, after the hot melt glue, envelope pre crease on both sides can make reading more smooth, comfortable, reach the standard publications binding.The binding rate of 1800 this/hour;Bind the range 1-150 pages (80 g/m2);Binding specifications for a4 size;Operation is as simple as the copier.Otherwise manual b5000 type, the binding rate of 1 to 25 this every 40 seconds;Binding thickness 1 ~ 540 pages (80 g/m2);Can bind the a3 short mouth;Operation is very simple, just put the binding material sandwiched special envelope, into the binding machine can complete, the price is 2000 ~ 180000 yuan.
Article 3. The spine type hot melt binding
Equipment weight only 24.75 kg;Bookbinding thickness of 3 ~ 350;Binding only 15 ~ 25 seconds, each equipped with back printer and cover printer, the lowest price 20000 yuan.German planax hot melt cloth binding machine maximum binding thickness is 25 mm, consumables used all kinds of linen.
Second, the class of holing
1. The ring pack
Plastic coil, iron ring is the most common way of binding, the biggest advantage is binding on the good file can be flat.
Article 2. The heat rivet
Article heat rivet binding is common in recent years, look from the appearance than the circle flat many, but through small Angle, reading is not very convenient.
(Gold Printing Group) |
